1 / 3
Wainlux K8 Rear Exhaust For Air Filter — zdjęcie 1
1 / 3

Wainlux K8 Rear Exhaust For Air Filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This upgrade allows you to attach the hose of the Air Filter on the rear side of the Wainlux K8 Laser Engraver

Ocena
0 / 5
Polubienia
4
Pobrania
30
Wydruki
0
Wyświetlenia
364
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

The idea of this modification is to improve the air filtration on the Wainlux K8. With no external air filter, the K8 just blows smoke into your room with a tiny 40mm fan. Combined with the external Air Filter for the K8, the 40mm fan doesn't really do much, since the filter has it's own more powerfull fan. I think the small opening from the 40mm fan might even be a restriction. 

Instead of pushing the smoke out through the tiny 40mm fan, I plan to flip the small 40mm fan and use it as an air intake. Now I can mount the exhaust hose on the rear door of the K8 with a bigger opening and maybe an additional 60x25mm fan, to create a higher static pressure and therefor more airflow through the air filter. Since I have the air filter mounted on the back of a cabinet behind the laser engraver, this upgrade also makes it look cleaner, because the exhaust hose just comes from the back directly into the air filter, instead of from the side and around the engraver to the back.

If you want to engrave larger pieces and have to open the door, you can just disconnect the hose and open the door as usual. You won't have air filtration in this case, but with open doors it won't do much anyways.

So far I have not installed this upgrade. I testfitted the mounting adapter with the hose of the provided airfilter, but I haven't done the modifications on the rear acrylic yet. 

You should actually be able to make the cutouts with the Wainlux K8 itself. While the rear acrylic panel is bigger (209x177mm) than the working area of the K8 (130x130mm) it should still fit in there when you open the front and rear door. To engrave/cut with the doors open, you need to enter “pro mode” by pressing the “repeat” button for 10s. Just make sure to wear appropriate safety goggles when operating the laser with open doors.

I added a technical drawing for the dimensions of the rear acrylic piece and the cutouts. For the corner radius I did not do any exact measurements, but it should be around 15mm.

If you don't want to make any cutouts to the rear acrylic piece, you could probably also replace it with a 3D printed part the same size or a new tinted acrylic piece.

I printed the hose adapter in ASA and it fits really nice. If you use a different material, you might have to scale the part a bit to account for the different shrinkage rate of different materials.

Tagi