1 / 4
Sublimation Tumbler Alignment Clamp - 20oz Tumblers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an alignment clamp for attaching sublimation paper/stencils to 20oz sublimation tumbler blanks.
- Ocena
- 0 / 5
- Polubienia
- 80
- Pobrania
- 547
- Wydruki
- 0
- Wyświetlenia
- 1973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (108)Powiązane
This is an alignment clamp for attaching sublimation paper/stencils to 20oz sublimation tumbler blanks.
To put the two clamp pieces together you need a single metric M5x10mm bolt and nut. The clamp has spaces for attaching rubber grips. I used anti-skid pads for chairs/furniture and cut them to fit.
I personalized my makes with a debossing, but the uploaded models are clean.