1 / 4
Box für Sägeblätter mit 20mm Bohrung und 140-168mm Durchmesser — zdjęcie 1
1 / 4

Box für Sägeblätter mit 20mm Bohrung und 140-168mm Durchmesser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box für Sägeblätter mit 20mm Bohrung und 140-168mm Durchmesser

Ocena
0 / 5
Polubienia
8
Pobrania
102
Wydruki
1
Wyświetlenia
538
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Box mit Haltern für Sägeblätter mit 20mm Bohrung und 140-168mm Durchmesser.

Für die Box werden noch 4 Inbusschrauben M3x20mm und 4 Muttern M3 benötigt.

Es kann alles mit PLA gedruckt werden, den Schnappverschluss habe ich allerdings mit PETG gedruckt.

In die Halter passen Sägeblätter von z.B. folgenden Sägen:

  • Bosch DIY
    • UniversalCirc 18V-53 (160x20)
    • PKS 55 A (160x20)
  • Bosch Professional
    • GKS 18V-57-2 L (165x20)
    • GKS 18 V-LI (165x20)
    • GKS 55+ G / GCE (165x20)
    • GKS 18V-57 (165x20)
    • GKT 18V-52 GC (140x20)
    • GKT 55 GCE (165x20)
  • Makita
    • HS6601 (165x20)
    • SP6000 (165x20)
    • HS6101 (165x20)
  • Metabo
    • KT 18 LTX 66 BL (165x20)
    • KS 18 LTX 66 BL (165x20)
    • KS 18 LTX 57 BL (165x20)
    • MKS 18 LTX 58 (165x20)
    • KSE 55 VARIO PLUS (160x20)
    • KS 55 FS (160x20)
  • Festool
    • TS 60 KEBQ-Plus (168x20)
    • HK 55 EBQ-Plus (160x20)
    • HKC 55 EB-Basic (160x20)
    • TS 55 FEBQ-Plus (160x20)
  • Mafell
    • MT 55 cc (162x20)
    • MS 55 (160x20)
    • MT 55 18 M bl (162x20)
    • K 55 cc (168x20)
    • K 55 18M bl (168x20)
  • Einhell
    • TE-CS 18/165-1 Li (165x20)
    • TE-PS 165 (165x20)

 

Tagi