Voron 2.4 Interior Pass-Through wire cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed as an add-on, for my rear wire cover. It covers the rear panel pass through hole.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 976
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I design these things for my own printer, then post them here just in case someone finds them useful.
My filament runout sensor and rear exhaust fan wires run vertically down the rear panel, and are covered by a wire cover, listed separately. The hole that the wires pass through is located just to the left (as viewed from the front of the printer), of the Z axis cable anchor. This cover attaches to the 2020 rail using one T slot nut and one m3x8 socket head cap screw.
I will test print and upload a make as soon as it finishes printing, so you can see how it is installed.
I've included the .stp file, in case someone wants to modify it for other uses.