1 / 3
Zhiyu PWM Temperature Controller MK4 Frame Case — zdjęcie 1
1 / 3

Zhiyu PWM Temperature Controller MK4 Frame Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

This is the first version of my MK4 frame mountable case for the popular Zhiyu PWM temperature controller. For mounting the controller board and the cover I use M3 x 6mm screws. 

There are diffrent versions of this controller out there and I will order the 2 PWM socket version tonight. I soldered 2 PWM males to the main connector - one gives 12V instandly for PSU and Mainboard and the other is fully controlled by temperature. The temperature sensor is mounted in the MMU-Plug in the backplate of my Tukkari case ;-) I will keep this case up to date from time to time.

Tagi