Watering Can Rose - Mild Improvement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iterative improvement of the watering can rose from @LesKaye 's can.
- Ocena
- 4,5 / 5
- Polubienia
- 9
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 300
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
@LesKaye ‘s watering can is phenomenal. The rose? Not so much. I was gifting the set to a friend and found the rose performance unacceptable. So, I set about tweaking it. After a quick volumetric flow rate analysis and a few prototypes, I settled on this design. Is this model perfect? No, but it performs well enough for my liking and I didn’t feel embarrassed gifting it.
Note
I've provided a model of @LesKaye 's rose without holes in case anyone wants to fiddle with their own hole patters. If you find something that works well, please upload!
Print Tip
There is limited access to the interior of the rose after printing, so do whatever you can to reduce stringing beforehand (eg. dry the filament even if it's new).