1 / 5
Borg Pi Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the BorgPi Case! This will fit the 3B+ Model of the RaspberryPi. This has cutouts for all the ports.
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 1475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (26)Powiązane
This is the BorgPi Case! This will fit the 3B+ Model of the RaspberryPi. This has cutouts for all the ports, including the microSD card slot. This is designed to be put together with some kind of glue/adhesive. I hope you enjoy it.
Note: After printing and finishing this there is one thing I would do different. the backside ports for power and HDMI should have more clearance in the cutout. Just an FYI for anyone who is going to make this.
Category: Computer
