1 / 2
NesPi Wall Mount with Switch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount (using 3M double-sided tape) with a place to add a switch that has an 8mm hole for the switch.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount (using 3M Double Sided tape) with a place to add a switch that has an 8mm hole for the switch (I used a small toggle switch). On the back are spots to hide wires and 2 wholes to run your pi power cord through. I hope someone will use it or modify it for their personal use.
Please note that this is simply the mount and not the NESpi. This is for a custom NESpi. It slides right in the top.
Category: Toys & Games
