Sterilite Gasket Box Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace those broken and stubborn latches! The box I have is the Sterilite 32 quart Gasket Box.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I am a beginner at 3D modeling and have been using Shapr3D. I got so tired of these latches breaking all the time and so I did my best to recreate them. So far, this latch for my Sterilite 32 Qt. Gasket box fits very well. The red latch in the picture is the printed model and the blue is the original.
I made the pins separate so the latch model can fit flat on the build plate. It does need supports but they came off with no problem at all for me. I also just super glued the pins into the latch.
I printed it in Polylite PLA Pro, but I plan on testing with PETG or ASA. Let me know what you print it in and how it does!
Like I said, I'm a beginner so please let me know how I can tweak things to make it better!