Drilling template for European cylinder lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tool is necessary when changing the type of lock with one that does not have the same key axis; the operation is…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This tool is necessary when changing the type of lock with one that does not have the same key axis; the operation is more difficult to explain than to do.
Anyway:
- from the external side, drill with the hole saw using the hole in the TEMPLATE as the center (the wood and then, if there is one, the sheet metal);
- remove the TEMPLATE and insert the cylinder.
That's all!
Cost: 10 minutes of time for taking measurements, planning and drawing and only 20 cents for PLA, compared to at least €10 on ebay...
I hope this simple "tool" is useful to you.
Good print!
If you found it useful, and if you like, you can offer me a coffee!, it will be an extra motivation to continue designing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
40%
Filament: NO PLA NO Post-Printing =============
Category: Tools