Icecubemachine, Eiswürfelmaschine für Camping (EINWÜRFEL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print icecube machine. It can produce one icecube within 1 hour, with the power of a peltier element.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 91
- Wydruki
- 2
- Wyświetlenia
- 4181
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Make an icecube with the power of a peltier element. Easy to print ice machine. It can only produce one icecube. Approx 1 hour per cube. You can use it for camping. Connect it with the 12V Carplug. (12V, 5A, 60W) Most of the parts are printable. The other parts can be purchased as standard components. Except the container for the cube. **
Mainparts: Cooling Fan, Aluminium heat sink, Peltierelement, some printed Parts, Aluminiumcontainer
** At the moment the Container is a special part milled from aluminium. Maybe there are suggestions from the community for an easy available standard component. Please let me know.
Partlist:
Fan: 92x15mm, 12V
Peltierelement 40x40x3,5mm, 12V
Aluminiumheatsink: 100x69x36mm (not on the Foto, you have to cut it on 92mm)
Thermal Compound
Fuseholder for 30x6mm Glasfuse
Fuse: 10A
Led 3mm with 4mm Holder
DC-Connector: DC5521 (Dm 12mm)
Switch: On/Off (20x12mm)
Spring: 17x5mm
Screw:
M3 x 50mm
M3 x 20mm
M2,5 x 25mm
M2 x 30mm
Some foam for insulation
The f3d-files are included so change and remake it. Please Print it and make it. If you have some ideas or questions please let me know.