Yet Another Lack Leg Joiner *sigh*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another Lack Leg joiner. Yeah Yeah.....I know.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I couldn't find what I needed so I just whipped this up.
My Sovol SV06+ lives on top of my Server Lack Rack and I needed to jimmy up an enclosure. Step one is to join together 2 sets of Lack legs. Next will be to fitting the foam insulation boards I have.
This will work with any of the Lack tables. My entire Lack Rack is using 3x 90x55cm Ikea Lack coffee tables, which I got 2nd hand from Gumtree coz I'm a cheap ass.
The enclosure part is using double length legs coz the printer is so tall. The outside part is 2mm thick, so it's flush with the tabletop. The inner part is 5mm simply for the extra perimeters around the screw holes. I know I could have done this differently, but I'm of the extra lazy variety.
The holes are made for 4Gx12mm wood screws. Internal hole for the leg is 51mm square. The Leg itself is 50.8mm and slides in with minimal resistance ;)
Printed all 4 at the same time with Overture PETG (245/85) at 0.2mm, 4 perimeters and I chose 0% infill because I like living on the edge and want to watch the world burn. Total print time was 12h.
3mf and step files included