Original Prusa Enclosure Sheet Holder Vibration Damper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduces vibrations in the metal sheets sitting in the original model.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 54
- Wydruki
- 3
- Wyświetlenia
- 866
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I attached the original model from BuildX to the left side of my enclosure.
At certain printer speeds the vibrations are transferred to the metal sheets sitting in the holder and they start to produce rattling noises.
This damper is designed to prevent that by providing a bit of support for the metal sheets and hold them tight.
Printing
- Filament: “Das Filament - TPU V2”, shore 94A
- Nozzle: 0.4mm
- Layer Height: 0.2mm
- Perimeters: 2
- Infill: 20%
- The wall thickness of 1.67mm is optimized for 0.4n/0.2mm and 2 perimeters
- Print with top side facing the print bed
Installation
I had to push the fins into the slots using some tweezers. But they need to be stuck in there otherwise the sheets pull the damper of the holder when you remove them.
Insert sheets by pushing them in the slots with the rear corner first and then push the front of the sheets in.