GP-5 to hose adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M/F adapters to connect to rubber hose with ends measuring OD/thickness as 27/4mm.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello, this file is for two adapters, both female and male to connect a GP-5 GOST thread to rubber hose.
The hose end is supposed to be 27mm in outer diameter, and 4mm thick. May fit slightly wider or thinner, by a millimeter or so, if you heat up and press fit the hose onto the adapter.
The hose I use fits snugly and feels very secured to the adapters.
There are two versions. One with the nice cutouts and one without. In the pictures you can see the female version with the cutouts and the male without them.
I printed with:
eSun PLA Matte
0.2 resolution
20% infill
No supports (print with the threads oriented downwards)
I was aided by the eminent thread STEP-file available at https://www.printables.com/model/160062-gost-gas-mask-threads
Enjoy!