X1C Screen cover plain and name and numbers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screen Protector, if you need more than 1-4 let me know i will upload more.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This cover fits tight just pops on and stays there..
I Printed .02 layer height there are 51 Layers if you want you name to stand out change primary color at layer 4 and back to primary color at layer 6, this is a quick print, Print time 20 mins
Slowing down to silent mode until you get back to primary color makes the lettering look better as well as a black background on layers 4 and 5
If you don't have lid Riser it's worth printing… does a few thing, it reduces the bend in the tubing to prevent filament breakage at tool head, also reduce heat at top of printer when printing PLA and like filament, no need to open door, also has angle and small holes to run wire if you want to LED light, reduce 90% of filament breakage and warping on some large based print with ABS and like material. RISER NEED TO BE PRINTED in ABS, PLA WILL WARP FROM HEAT