Vasemode Twist Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organization for small parts
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a very simple storage system for small parts. I am using it for storing different sizes of ferrules. The lid even has some detents to lock the rotation.
It is a very easy print. No large overhangs. The only hardware you need is a small bolt. M3 or anything similar works.
You can try printing the windows but I couldn’t manage to print them fully clear. instead I just cut some thin plastic film for the windows.
The center and the lid should be printed normally.
It’s easiest screwing the Lid and the Center fully together and then glueing the center into the container. When the glue has dried you can back off the screw a bit and get the lid to move. Then just adjust the screw to where you are happy with the detent force.