Crokinole 13 Disk Container Dispenser v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crokinole 13 Disk Holder/Dispenser v3 with flat sides, window, and engraved CROKINOLE text
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Crokinole 13 Disk Holder/Dispenser v3 modified from my original version
Difficult to remove support material from CROKINOLE text. If using PrusaSlicer you can add support blocker for the CROKINOLE text while keeping support for window slot and cap. Add supports for bottom of R, O's, and N. Block support for all other letters.
I added a version of the container without CROKINOLE text.
Added flat sides to stop rolling off table
Window slot on front to see how many disks are contained.
Print with PLA or PETG
Print container inverted with closed end down.
Print cap closed side down with supports. Block support for CROKINOLE text.
If you have questions or suggestions for improvement please leave a comment.