Perfectly Sized Sanding Block - 1/8th and 1/16th Sheet of Sandpaper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exactly fits 1/8 or 16th of a standard sheet of sand paper
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 299
- Wydruki
- 0
- Wyświetlenia
- 953
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: Uploaded a new model of the 2.25 sander as well as new 1.125 sander. New models facilitate easier printing.
A sanding block that perfectly fits a 1/8 sheet of 9x11in sand paper.
Tear the sand paper sheet in half the short ways. Then in half the short way again. Lastly, in half the long way. You should have something that looks like the following. You want a piece that is 2.25" x 5.5"
Update: Tear a 2.25x5.5 in piece in half the long ways to fit the smaller sander
Radius on the ends is .125" and .375" respectively. Threads are ½"-12.
Radius on the ends of V2 is .125 and .25. Threads still ½"-12
Print Recommendations
3 walls, 15% infill, print orientation depends on your printer and its quality/accuracy. Screws may need to be worked back and forth a few times to make sure everything is free.