TinyHive Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small stackable box for storing or working with little parts. Has a lid that doubles as a plate and a grouping grid.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
About
I often work with small parts - be it electronics components or mechanical parts, tiny gears…and find myself in need of storage, or a temp sorting workbench. I designed this little box to be both stackable (one box acting as the lid for a next one) and groupable (using a hexagonal grid). The design comes with a lid for closing, that doubles as a little plate during work when the box is open. You can print all parts together, but they are meant to be printed per item as needed. It's also possible to stack boxes on top of a lid again.
My daughter uses this one to store Dummy 13 hands and accessories ;-)
Printing
- Printed on Bambu X1 Carbon using 0.20mm Strength @BBL X1C Profile
- No supports needed
- Use PLA Tough or PETG
- 25% infill, rectilinear
Assembly
Nothing to it, really ;-). The parts should snap together easily. They should sit tightly together when using the grid.