HSW clamp with longer connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 2x4 I needed to attach my Honeycomb Storage Wall to was a little too far away, so I made this.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The wall stud I needed to affix my HoneyComb Storage Wall to is about 4cm behind it. Luckily, a tabbed insert will actually fit the honeycomb and stay reasonably well from behind, so I made a new connector to fit my purposes.
By using the included OpenSCAD file (Library for attachments required - see the remix credits) along with also included frame-long_fixed.stl, you can make your own clamp with whatever length connector you need. The rest of the necessary clamp parts (screw-end.stl and screw-long.stl) are available from the original.
Print fairly strongly - PETG and 20% infill so you can tighten the screw sufficiently without damaging the part.