NAS / Plex Media Server Enclosure for Rock64 & Seagate 5T HDD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated 7/18/2020. Enlarged the size to accommodate the newer Seagage drives. I designed this NAS enclosure to hold my…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Updated 7/18/2020. Enlarged the size to accommodate the newer Seagage drives. I designed this NAS enclosure to hold my Rock64 case and the 5 TB hard drive which make up my low cost Network Attached Storage system. It is driven by the open source "OpenMediaVault" from Openmediavault.org. I am also using the exact same setup for a Plex Media Server.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
.2 mm
Infill:
Standard 20%
Filament: 3D Solutech PLA Orange Post-Printing =============
This enclosure was designed to not require any screws or fasteners to hold the top to the bottom or the hard drive or computer within its structure.
How I Designed This
NAS / Plex Media Server for the home
This NAS enclosure is designed around the Rock64 computer because it has a USB 3 port and an RJ45 ethernet port. Software running the NAS is OpenMediaVault from openmediavault.org. An excellent, low cost NAS. I am using a Seagate BackUp Plus 5 TB drive as the storage device. The Rock64 case was previously designed and posted here. I also am using the exact same setup to house a Rock64 and 5TB drive for a Plex Media Server.
Category: 3D Printing