Insta360 X3 Accessories Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @BillW_4035 battery box to include the 3x Quick Charger included in the ultimate combo.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
**Please refer to @BillW_4035 original model for the rest of the parts!**
Able to print without supports for PLA, but brim and tree support recommended for higher temp materials such as PETG, ASA.
3MF included if you want to print the internal mold out of TPU. You may need to trim the corners later since the mesh is quick and dirty.
6x M3*35 bolts and 6x M3 nuts/nylock nuts required for hinges.
Add foam to the top cover for additional holding (there's an airgap from the top cover to the accessories inside).