1 / 12
Ender3 V3 SE ball bearing Filament spool holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In addition to the printed item, we also need a 40mm 6203 bearing.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 207
- Wydruki
- 2
- Wyświetlenia
- 2787
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (58)Powiązane
In addition to the printed item, we also need a 40mm 6203 bearing.
Assembly Steps
Assemble following the order of the images.
1.Insert the bearing into the housing.
2.Insert the hex bolt, paying attention to its orientation.
3.Place a spacer on the threaded portion (with the smaller outer diameter facing outward).
4.Secure it with a lock nut to the Ender3 holder.
5.While holding the housing, fasten the shaft.
Print Settings
Printer:
P802m
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament:
RepRapper PLABlack
Category: 3D Printer Parts