My Universal Spool Holder 608ZZ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My favorite spool holder. Uploaded here for my own convenience.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a reupload of the spool holder I've been using for years (and I needed another one today). Originally from thingiverse.
It is generated from the included OpenSCAD file (also originally from thingiverse).
The original idea came from this thing: https://www.thingiverse.com/thing:124649
It has a thin boundary above the bearing, so you need to drill it out or clean it up after print.
The uploaded stl file is for a 25-70mm holder using a 608ZZ bearing. The hole for the bearing in the uploaded stl is set to 22.4mm (while the bearing itself is 22mm)
The clip can be used to keep everything in place.