1 / 2
Grüntek X-25 professional branch shears/cutters
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bumpers for the Grüntek X-25 professional branch shears/cutters
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
After a while the bumpers on the Grüntek X-25 professional branch cutters got loose and one was lost in the grass. So I took the one that was left and recreated the model.
Considering the outdoor usage and the impact it should handle, I printed them with PETG as a first try but I also provide the pre-sliced files for ASA and PA. PLA+ may work but the dimension accuracy could be an issue as by design the fit should be very tight.
Prints without support on the flattest side.