1 / 12
REV Through Bore Encoder Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the REV though bore encoder for FTC and it fits inside gobilda u channel.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
To assemble you will need 2 m3 screws and 2 m3 lock nuts and two m4 screws and a rubber band or a few rubber bands for a stronger spring. The m4 screws go on either side of the channel to hold it in place and you use a rubber band to spring it. When building the shaft make sure the squares/rectangles line up they are there to show how to assemble correctly.
