Hexagon Packing Puzzle with Container and Lid, No support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hexagonal/honeycomb shaped packing puzzle box should present a nice challenge. Fully decorated container and lid.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model and instructions
This hexagonal/honeycomb shaped packing puzzle box should present a nice challenge. It consists of 15 pieces and a with triangles decorated container and lid.
I've designed the lid to print up-side down, without any brim necessary. I recommend using the v3 version of the lid. It has some flexible friction tabs which could help with making the lid fit better to the container should the original lid be too loose. It also has an increased inner depth should the puzzle pieces turn out to be taller then expected.
All pieces and parts can be printed without any support!
The pieces can be flipped and turned to fit into the container. For the easiest puzzling experience puzzle directly inside the container or in the upside down lid, to make sure the puzzle pieces don't move around too much.
Once completed the puzzle will consist of 4 layers, without any open gaps.
Enjoy! Please like 👍 the model if you did, it's much appreciated! I'd love to see any makes if you printed one :)
Printing tips
- Layer height 0.2mm or lower due to the decorative triangles on the pieces and the flexible friction tabs in the lid.
- Walls 2+
- Nozzle 0.4mm recommended
- No support
Credits
The design was modelled fully from scratch by me in Fusion 360. It was inspired by the ‘Prisma Puzzle’ by https://www.printables.com/@Pentoma_317401 so credits to him/her for the original idea. The pieces and solution are unique for both puzzles.