Sound devices A20TX CLIP holder for Rycote PCS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sound devices A20TX CLIP for Rycote PCS
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
PETG - for strength and flexibility in the clip
100% infill - for strength in the clip
Tree support for the clip + upper arc.
--
A20 is secured with 2 countersunk screws (2,5x8mm), remember to remove small Allen set screws first, there’s 1 extra hole on the side for an aditional 2,5x6mm screw, but shouldn’t be necessary.
Then it all snaps onto the lower, black part, of a Rycote Boom PSC.
Cable clips on the back, to hold the Sound Devices AC-BALXLR-4 cable, which can be shortened to approximately half the length
Its possible to change batteries while mounted.
Its also possible cover it all up with a thin small dry bag, which clips in as well, to protect against dust and rain. For example Sea to summit lightweight 1L.