Table Tennis Bat / Tischtennisschläger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight 3d-Printed Tabletennis Bat - Leichter 3d-gedruckter Tischtennisschläger
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 1494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I really wanted to make a lightweigth 3D-Printed Tabletennis Bat. Because I also really like the shape of my current wooden bat I decided to design my own bat resembling it. I printed it with 2 perimeters, 3 top and bottom Layers and 15% rectilinear infill (You can also check the .3mf file for this). The core weighs in at about 60g like this. I further decreased the infill of the grips to save some more weight, they weigh about 15g toghether, so the bat is about 75g total.
This is the first iteration of this project, to acompany the bat I ordered some low price rubbers from Amazon(Muzitao Ultrabite), they had some great reviews and I figured they were a good bet to make a cheap complete bat.
I will soon post images of the finished Project.
Sadly the core doesnt fit the buildplate of the PrusaMINI, but it fits the MK3 perfectly. So I had to ask a friend with a MK3 for help with that, thanks mate. Thats why I only provide the gcode for the grips.