Hamskea Arrow rest wide launcher copy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A copy of the Wide Launcher (LA020).
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I use an Hamskea Trinity on my bow (Mathews TRX38_G2).
Unfortunatly the provided arrow rest-blade, the part that actually holds the arrow, had slightly misalligned mounting holes (not on a perfect horizontal line).
This is not a problem when shooting, as you can tune the arrowrest and change the horizontal position a tiny bit …
But it distracts me everytime I draw the bow.
I have taken the reflex to check on the arrow on each draw … and seeing the arrowrest slightly tilted gets distracting.
So I designed a copy of the original and printed it with CFPA (nylon with carbon fiber). It is very strong and as this was designed by software, when printed, all holes were on the perfect position.
The original is certainly more stiff then the one I printed … but the printed one (see pictures) is more then capable to do the job and does NOT flex by the weight of the arrow.