HSW Stubby and Stabby holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb Storage Wall inserts that make use of space behind the honeycomb, for those who have it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My honeycomb storage wall is ‘floating’; attached to pegboard on one side and clamped to a 2x4 wall stud on the other side such that there is open space behind it. A limitation of storage systems like pegboard or honeycomb is that vertically hung tools cover up what would otherwise be usable places for inserts.
So, introducing inserts Stubby and Stabby, that make use of the space behind my storage wall in order to pack the tools in a little more efficiently. Obviously, this strategy will not work when the honeycomb is flush to a wall. If you do have space behind there but do not need to hang up stubby screwdrivers or ice-picks, I have included the .scad file (inserts library required) so you can change the opening to fit your tools.
I printed these on their side, so small supports are needed on the rounded edge (see picture). Very likely could print them vertically without any supports.