Table and Chairs for Sylvania Family Critters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,12 € – 2,59 € netto (bez VAT)
Dla pliku: Table_SylvanianChairs_1-16__0.4n_0.2mm_PLA_MINIIS_2h0m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,35 € netto (środek widełek).
- Masa podana przez autora
- 37 g
- Czas druku podany przez autora
- 1,99 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A table with chairs for ‘critters’ with tails, like the Sylvania Family bunnies.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 337
- Wydruki
- 2
- Wyświetlenia
- 1042
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
A table with chairs for ‘critters’ with tails. Our dollhouse is inhabited by Sylvania Family-sized bunnies and this set was built for them.
Around a 1:16 scale, the chairs print with minimal supports. The design allows the critters to sit properly in the chair, as the tail can fit through the back of the chair. The chairs print best back side down with support for the legs. I found organic supports work well.
Follow Me
I have created quite a few accessories for my wife's books. In the picture below everything is 3D printed.

If you would like me to post more of these types of items you can let me know by following me. That way you will be informed when I post new models, and I will have the motivation to post more.