Litter box backsplash clips.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gives you a method to attach 4mm corrugated sheets to the top edge of a litter-box to prevent over spray.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Most litter boxes are relatively short and if you have male cats who don't squat, these clips will allow you to create a backsplash out of 4mm corrugated plastic sheeting. These clips hold strong to the corrugated plastic but rest gently on the top lip of any litter-box bin with a 15mm flat topped rim. This makes it easy to create your backsplash to fit the bin and secure it on top, but it also is easily removable for cleaning and such!
Note: In their final form we also formed the corrugated plastic into a “U” shape so that we could create one continuous sheet to prevent liquids bypassing the backsplash. This did add some extra rigidity to the backsplash and made things sit better against the walls of the litter-box.
I tested and printed mine in PETG and PLA filament. I went with PETG for the final ones as those should stand up to more aggressive deep cleaning compared to the PLA ones IMHO.
Printing instructions: Due to the shape I recommend printing on one ends, I used a brim as well to prevent lifting even though with the shape of these that very well may be unnecessary.