eTrex garmin bike barholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this one since other i found was only i one piece and that made some parts fragile when printed in the supposed…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this one since other i found was only i one piece and that made some parts fragile when printed in the supposed direction (like the holding arm and bar holder). The Arm should be printed laying down aswell as the bar holder, see picture. It was glued together with acetone. Using a M4 bolt >35mm (40 mm in picture).
Made for 25 mm handle bar but could be modified.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
Brim 5 mm if you need
Post-Printing
I like that the color match :)
Category: Outdoor & Garden