Master Chief - Halo - HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Master Chief - Halo - HueForge
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
For the helmet:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Polymaker Polytera Black Transmission Distance: 0.3
PLA+ IIID Max Apple Green Transmission Distance: 2
PLA Kexcelled Grass Green Transmission Distance: 5
PLA PolyLite Lemon Yellow Transmission Distance: 6
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Apple Green
At layer #8 (0.72mm) swap to Grass Green
At layer #11 (0.96mm) swap to Lemon Yellow
At layer #14 (1.2mm) swap to Cotton White for the rest.
=================================================================
For the visor:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Polytera Black Transmission Distance: 0.3
PLA+ Esun Magenta Transmission Distance: 4.5
PLA+ Sunlu Pure Yellow Transmission Distance: 6
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Magenta
At layer #12 (1.04mm) swap to Pure Yellow
At layer #18 (1.52mm) swap to Cotton White for the rest.