1 / 1
USB-C adapter holder for ATH-ANC500BT headphones — zdjęcie 1

USB-C adapter holder for ATH-ANC500BT headphones

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for permanently mounting a USB-C adapter to Audio-Technica ATH-ANC500BT headphones.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Public Domain

I made this part to convert my headphones to USB-C charging quickly and without voiding the warranty. It is meant to be mounted with hot glue or double sided tape. Without this holder the Micro-USB to USB-C adapter was causing a lot of strain on the socket and I was afraid of damaging it. Before printing check dimensions as your adapter may be a bit different than mine. Oval hole is 11 x 5.2 mm and fitment is very tight. If you need a different one, editable FreeCAD file is attached.

Printing instructions:

  • Print with TPU at 0.2 mm layer height
  • No supports
  • 50% grid infill

Tagi