Nano Drak DJI nose with embedded antennas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed my nano drak DJI air unit mount so that antennas are embedded in mount and side of fuse to give it a more…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Remixed my nano drak DJI air unit mount so that antennas are embedded in mount and side of fuse to give it a more streamlined look. Also I'm using an optional pan servo for the camera so now the antennas are out of view. Camera or servo can fit in the slot for the camera.
print on its back with no supports except manual supports where indicated.
included the optional camera holder for the pan servo (2 versions with different hole patterns to screw into servo horn).
Caddx peanut holder is designed to have the magnetic charger attached on the back so you keep the camera charging on a 5v lead. These peanut holders must be printed out of TPU.
Some can screw onto a servo horn so that they can fit any servo.Others can screw directly onto the servo. But I only designed for two types of common servos:
The SG90 fits various other servos like this one; https://fpvdogfight.com/products/motionsic-check-six-custom-servos
One of those two likely fits lots of servos
Category: R/C Vehicles