Ritewing Drak GoPro 3/4 Nose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
*May 13 2018 update: Added a snub nose version for the FPV cam so that the front of the camera is at the edge of the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
*May 13 2018 update: Added a snub nose version for the FPV cam so that the front of the camera is at the edge of the print to avoid seeing the print in the FPV view.
I took Havardsa's nice design for a GoPro mount for the Drak and added the ability to wire a charging cable so the GoPro can be powered off a 5V regulator from the flight battery. Also added tunnels for that charge cable and for the FPV camera to the back of the mount to keep the wires hidden. Finally I enlarged the area for the FPV camera to more easily fit other cameras and I widened the velcro strap slit. Haven't yet installed on my plane but the print looks like it will work nicely. I printed mine with PETG at 15% with 4 perimeter shells. I’d suggest ABS or PETG.
This is the charge cable that I’m using: https://hobbyking.com/en_us/super-slim-gopro-3-a-v-cable-and-power-lead-for-fpv.html
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
10-15%
Category: R/C Vehicles