Borderlands Duke by Kallunke - optimised orientation for printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Most files are the exact same files posted by Kallunke in his original release. The only changed parts are stand,…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Most files are the exact same files posted by Kallunke in his original release.
The only changed parts are stand, exhaust_front and exhaust_aft. These were split into two pieces. The bottom piece prints without support, the top one needs quiet a lot of support.
I oriented all stl-files to be printable and wanted to share them to make printing it easier for newcomers.
Due to the design of some parts, support is necessary for following files:
stand_TOP
exhaust front_TOP
exhaust aft_TOP
scope body
hammer
repaired_spine-middle
Category: Props