V-Spooler Remixable Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Released separately with appropriate licensing to enable motorisation modifications.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 223
- Wydruki
- 1
- Wyświetlenia
- 2495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a re-mixable release of the V-Spooler gearbox cover and main drive axel to allow other makers to create motorisation modifications to V-Spooler and distribute them separately.
There is also an official motor mod coming in the near future!
Please note that if you are distributing the main axel with print settings that you should, if possible, pre-configure it with a randomised z-seam to prevent vibration from the seam on the bearings.
In the V-Spooler 1.0 parts a section of the lower central right frame part is now included for the purpose of allowing you to align your mod to the new mount points at the bottom. The parts are correctly aligned in the STEP file as per the real model.
Also now included is a vanity plate which you can remix and put over the motor-mod mount point at the bottom of the right central frame part.
As the licensing just covers the gearbox cover and main drive axel components and not the whole of V-Spooler, this means that you can only distribute your V-Spooler modification and this gearbox cover and axel components and not the rest of V-Spooler.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee using the button below. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨