1 / 11
Aruba Networks AX Ceiling Mount Bracket AP-515 AP-MNT-MP10-E
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(NOTES) This is a ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-E I…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 610
- Wydruki
- 2
- Wyświetlenia
- 4503
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (36)Powiązane
(NOTES)
- This is a ceiling mounting bracket for the Aruba AX series APs.
- This is equivalent to the AP-MNT-MP10-E
- I personally custom made these, as the cost of an Aruba brackets are $34 each or $340 for 10 of them!
- Just wanted to share with the community to help.
- These work amazing!
- Strong as all get out. Printed vertically, for max strength. We tried to break them, and we can't.
I have made the other sizes and have posted here as well. (SUPPORTED ARUBA MODELS)
AP-505
- AP-515
- AP-535
In short.. any new AX model, with the new custom brackets. (FILAMENT USED)
I used PLA for its strong properties. But I am sure PETG and ASA would work just as well.
- Even though the Aruba APs get stinking hot, the PLA still holds up well.
Category: 3D Printing