1 / 6
200SX S13 DCC aspirator tube adapter from RHD to LHD V2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter is designed for my LHD s13 200sx, becuse I am swapping the JDM digital climate control to my car.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This little modification is needed for aspirator hose connect to your heater box to proper work of interior temp sensor.
This is the scond version. I am designed only the bottom part of adapter. So you need the JDM part and cut down like on the pics I have attached, then use this printed part and glue it together.
On the pics I am used the first version(black), the yellow is the actual.
