1 / 16
Aruba Networks AX Ceiling Mount Bracket 15/16" 23.81mm AP-515 AP-MNT-MP10-B
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 15/16" or 23.81mm (The larger size) suspended ceiling mounting bracket for the Aruba AX series APs. This is…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 260
- Wydruki
- 0
- Wyświetlenia
- 2583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
- This is a 15/16" or 23.81mm (The larger size) suspended ceiling mounting bracket for the Aruba AX series APs.
- This is equivalent to the AP-MNT-MP10-B
The red flat piece in the middle is a sample to simulate the ceiling bracket (SUPPORTED ARUBA MODELS)
AP-505
- AP-515
- AP-535
In short.. any new AX model, with the new custom brackets. (NOTES)
I personally custom made these, as the cost of an Aruba brackets are $16 each or $160 for 10 of them! I suspect I could crank out hundreds of these on a single $40 PLA spool.
- Just wanted to share with the community to help.
- These work amazing!
- Strong as all get out. Printed vertically, for max strength. We tried to break them, and we can't.
- I will make the other sizes in the future, if ever needed. Wouldn't mind making the clay bracket, and the smaller AP-MNT-MP10-A bracket. Perhaps in time. Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
Default
Infill:
Default
Filament:
Prusa PLA Black
Category: Computer