HDzero SteadyViewX Module Cover (remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of IsTim's SteadyViewX analog VTx module cover for use with HDzero goggles.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the design by IsTim of a cover for the Skyzone SteadyViewX analog VTx module for use in the HDzero goggles.
I included both .STL and .STEP files of the design based on IsTim's design.
The purpose of this remix is to address some issues I had when trying to print and install cover, especially when printing it in PETG. His design is very nice but I had problems with the fragility of the mounting clips and standoff pins, and the very thin vent slots.
I beefed up the mounting clips, beefed up the standoff posts, and widened and reduced the number of cooling vents on the front of the cover. This increases both durability and the ability to keep the module cool.
I suggest printing the cover with PETG because of its ability to handle higher temperatures and ability to stand up to direct sunlight - both weaknesses of PLA.
I did the design using OnShape cad software. The files on OnShape are public and available to anyone with an account.