Christmas tree with base Decoration Version 01 (with hanger for Christmas balls/decoration), vánoční stromek se závěsem na vánoční kouli
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Christmas tree with base Decoration (with hanger for Christmas balls/decoration), vánoční stromek se závěsem na vánoční
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 286
- Wydruki
- 1
- Wyświetlenia
- 1094
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Christmas tree with base Decoration
The scale of the tree is made according to the intended used Christmas ball with diameter 60mm.
The wall thickness I usually use is 1,5mm which is enough to be stable by using 60mm Christmas ball as pendant within the tree.
You can download the Tree in two thicknesses, 1,5mm and 2,0mm.
You can download the Tree Base in three sizes and according to the Tree trunk in 1,5mm or 2,0mm (sometimes you would need the bigger size of the base to make the Tree more stable, according to the used pendant within the tree).
Usually used Print Settings:
Material PETG (PLA)
Layer height 0.2 mm
Infill 20%
Supports None
Brim None
Other Versions:
Version_01
https://www.printables.com/cs/model/698664-christmas-tree-with-base-decoration-version-01-wit
Version_02
https://www.printables.com/cs/model/700066-christmas-tree-with-base-decoration-version-02-wit
Version_03 (A and B)
https://www.printables.com/cs/model/700080-christmas-tree-with-base-decoration-version-03_a-a
Version_04
https://www.printables.com/cs/model/700096-christmas-tree-with-base-decoration-version-04-wit