1 / 2
Vex Rover Wheel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wheel for Vex V5
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Axel hole is 6.5mm by 6.5mm.
Print Settings
Printer:
Ender 3 S1
Layer Height:
0.2
Infill:
Cubic @ 20%
Notes:
Printed with 2 Walls
There are three versions. One with 8 spokes, one with 6, and one with 4. These essentially are a suspension of sorts with 8 spokes being able to support a lot of weight, 6 being a middle ground and 4 being a light version.