M2601 CR-10S Pro [Micro Swiss Direct Drive Extruder] - Fan Shrouds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shrouds for installing the (M2601) onto the original CR-10S Pro which has an 18mm proximity sensor as the probe.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 876
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro (V1).
The Direct Drive Extruder will work with both the shorter Ender-3/CR-10 All Metal Hotend (4-finned) as well as the longer CR-10S Pro All Metal Hotend (5-finned). Check the amount of cooling fins on your hotend and print the matching fan shroud.
Specific parts the fan shrouds were designed for:
Extruder: M2601 Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
Hotend Option 1: Micro Swiss CR-10 All Metal Hotend (4-finned cooling block)
Hotend Option 2: Micro Swiss CR-10S Pro All Metal Hotend (5-finned cooling block)
Part Cooling Fan: 4020 Blower
Hotend Fan: 4010
Probe: 18mm Proximity sensor
The PTFE Bracket will align the PTFE tube with the filament runout sensor, but you can also use the original Bowden extruder body as a bracket to hold the PTFE tube, instead of the 3D printed bracket.