1 / 1
Magnetic 120mm Fan Exhaust Diverter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix allows for the use of 10mm diameter by 1.5mm thick neodymium magnets to attach it to a steel PC case panel
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
This remix allows for the use of 10mm diameter by 1.5mm thick neodymium magnets to attach it to a steel PC case panel. This model was quick and dirty, the edges of the holes are .2mm wider than 10mm to allow for some wiggle room while installing the magnets.