Neon LED Rope Light Tree with Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Neon LED Rope Light Tree with Stand
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 236
- Wydruki
- 1
- Wyświetlenia
- 1686
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This Neon LED Rope Light Tree is a fun addition to any room 🌲 The tree "track" for the lights print in two parts plus two small connecting insert pieces. Once the two tree parts are printed connect them together with the small connecting pieces and insert the neon rope light. To add the rope light, simply push it into the track and then insert the tree into the base.
This rope light is long (16.4ft). If you don't want extra rope light coming out of the base you can trim and cap it:) An alternative is to print more trees and continue adding the rope light through all of them 🌲🌲🌲
3D PRINTING SETTINGS
Layer Height 0.2mm
PLA works great
15-20% Infill
No supports needed
Dimensions: 12in. tall x 9in. wide x 4 in. diameter base
Needed: Neon LED Rope Light
These LED rope lights are pretty standard but here is a link to the exact one I bought from Amazon: https://a.co/d/dxvdiJd
I do not recommend scaling the print smaller because this will change (decrease) the width of the track and the rope light may not fit.
Have fun printing!