Smaller Corners for Ikea Lack Enclousure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I edit the corners of the enclosure, so that it can fit on a smaller printbed.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 278
- Wydruki
- 1
- Wyświetlenia
- 2485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I edited the corners for the Ikea Lack enclosure from pjp_innovation https://www.printables.com/de/model/388132-ikea-lack-enclosure
I make the corners shorter on one end so that they fit on my square bed.
the corners are 200x200 now. The corners are for the version with the 510mm panels.
The Spoolholder comes on top now.
Please refer to the original instructions. You need the following files to print from the original.
SHAFT_HINGE
- BASE_HINGE_LEFT & BASE_HINGE_RIGHT
- TOP_HINGE_LEFT & TOP_HINGE_RIGHT
- BASE_SPACER_FRONT_LEFT & BASE_SPACER_FRONT_RIGHT
- TOP_SPACER_FRONT
- 3x TOP_SPACER_REAR
- 3x BASE_SPACER_REAR
I printed in PLA with .02 layers on my Neptune 4 Pro.
10% Gyroid infill
except for the hinges:
Shaft_hinges: 40% Infill
Top and Base Hinges 15% Infill.